Triple Play
This module triples your visibility in the rear.
Convert your rear turn signals to running, brake, and turn with optional pulse brake capability. Pulse brake can be turned on or off with built in switch on underside of box. Works with incandescent bulbs or LEDs.
Fits: '96-'09 Softails, '97-'09 Dynas, Dressers, Road Kings, and '99-'03 Sportsters. Item: GEN-TPU-HD
(for use with incandescent bulbs)
Item: GEN-TPU-HD-LED
(for use with LEDs, includes no load, no heat, Signal Stabilizer)
|
V-Rod Triple Play
This module triples your visibility in the rear.
Convert your rear turn signals to running, brake, and turn with optional pulse brake capability. Pulse brake can be turned on or off with built in switch on underside of box. Works with incandescent bulbs or LEDs. Includes one alarm compatible load equalizer.
Item: GEN-TP-V
*****
A second GEN-5.6-15 load equalizer must be purchased if LED turn signals are used both front and rear.
Fits: All V-Rods
Item: GEN-5.6-15
|
Universal Load Equalizer |
Badlands Illuminator Pro
This module triples your visibility in the rear.
Install a pair of red lenses or custom turn signals with red lenses. Now your bike has 3 running lights, hit your brakes, and you have 3 brake lights. Touch your turn signal button, and you maintain your turn signal function while the other side remains a running light, or if you are braking, a brake light.
- Built-ln Load Equalizer
- Runs your stock OEM turn signals.
- Runs custom Incandescent small turn signals , Halogen and LEDS too
- Easy to follow instructions and connectors included
- Made in the USA with quality components
Plug-In Illuminator, Security System compatible!
Fits : H-D's FLH models 97 to present , Softail models from 96 to present except 04 and up Deuce Softails , Dyna models from 97 to present , XL models from 99 thru 03
Item: ILL-01-A
*****
Plug-in Illuminator, Security System compatible!
Fits : XL models from 04 to present
Item: ILL-01-C |
Rear Run-Turn-Brake Controllers
A marvel of electronic wizardry, this module makes single filament or single circuit turn lights on the rear of the bike function as running lights, turn signals, and brake lights! It can be used with our L.E.D. or Halogen Silver Bullets, our incandescent Fender Strut Lights (P/N 2115), stock turn signals, or any single filament light you may already have installed on the rear of your bike. Two versions are available, a plug-in version for most '96 and newer MSRP-Davidsons and a splice-in version for most '95-earlier MSRP-Davidson bike with single filament turn signals and a tail light with running and brake functions. Compatible with '02-later H-D factory cruise control..
Direct plug-in for: ’96-’09 Softails except FSCW/C); ’97-’09 Dynas (except '09 FXDB), '97-'09 Electra Glides, Road Kings (except '09 FLTRSE) Street Glides & Road Kings; and ’99-’03 Sportster
'04-'09
*****
Pin Hardware Adapter
Sportsters require additional Part - 4831
This simple plug-in adapter makes installation possible on '04-'09 Sportsters.
******
Earlier models require
Part 4832
4832 8-Pin Hardware Adapter
This splice-in 8-pin Amp connector is required to install Küryakyn Run-Turn-Brake Controller on ’91-’95 Softails; ’91-’96 Dynas, Dressers, Road Kings; or ’91-’98 Sportsters.
*****
'94-'01 Touring Modules with Cruise require additional
Part - 4858
*****
4859 Rear Run-Turn-Brake Controller with pulse brake capability.
This module will cause the tail light and rear turns signals to pulse 3 times then go solid when the brake is applied. The pulse capability can be disabled.
*****
Diode Kit (not shown)
When Run-Turn-Brake Controller is installed on a '94-'01 Touring model equipped with H-D's accessory cruise control, it is necessary to install this Diode Kit. It is a simple installation and will keep your cruise operating normally. For '94-'01 Touring Models with H-D Accessory Cruise Control.
4858 Diode Kit (ea) |
Run-Turn-Brake Controller and Diode Kit -Metric Cruisers
Plug and Play Module for Honda & Yamaha Cruisers
Change your turn signals into running, turn and brake lights and light up the back of your motorcycle for increased visibility. This plug and play controller connects directly into the stock OEM wiring harness under the seat with no need to splice any wires. Simply finish off the installation with the required red turn signal lenses, or bulbs if you have clear lenses, for the rear of your motorcycle.
Note: Adds optional pulsating brake light function. Rear running lights on a motor vehicle must be red
Plug and Play Run-Turn-Brake Controller for Honda (set)
Fits: '04-'08 VTX 1800 R & S, '05-'07, VTX 1800C,
'06-'09 VTX 1300R, S, C, T
Clear, Smoked, Red Turns Signal Lenses
Item: 4610
*****
Plug and Play Run-Turn-Brake Controller for Honda (set)
Fits: '02-'03 VTX 1800, '04 VTX1800C, '03-'05 VTX1300
'02-'03 Shadow 750 Ace
Clear, Smoked, Red Turns Signal Lenses
Item: 4611
*****
Plug and Play Run-Turn-Brake Controller for Yamaha (set)
Fits: '04-'09 Road Star 1700 (except Warrior), '04-'09 V-Star 1100 & 650, '07-'09 V-Star 1300, '09 VStar 950
Clear, Smoked, Red Turns Signal Lenses
Item: 4612
*****
Plug and Play Run-Turn-Brake Controller for Yamaha (set)
Fits: All Road Star 1600, '99-03 V-Star 1100 & 650
Clear, Smoked, Red Turns Signal Lenses
Item: 4613
|
Wire In Metric Cruiser Controller
A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights! The module wires in beneath your seat and is intended for use with L.E.D. or Halogen Silver Bullets or other custom turn signals you have installed on your bike. The unit will work fine with stock turn signals as well. The unit has an optional flasher that when activated will flash the brake lights 5 to 6 times then stay solid.
Caution: Do not use 4710 on Victory Motorcycles that have stock LED tail light that operates at 9VDC. Includes one 4807, second 4807 may be necessary if LEDs are used both front and rear.
4710 Rear Run-Turn-Brake Controller, Splice-in Type
|
Triple Whammy™ Run-Turn-Brake Light Kit
Make sure you are seen on the open road! This kit allows you to change your stock turn signals into Run-Turn-Brake lights with easy Plug and Play installation. The optional flash mode flashes the taillights when the brakes are hit – catching the attention of anyone behind you.
This kit includes Plug and Play Run-Turn-Brake Controller and replacement lenses or bulbs to update turn signals to Red.
Note: Triple Whammy includes everything you need for installation on motorcycles equipped with OEM turn signals. Installation of this product may be in violation of FMVSS #108
Triple Whammy Run-Turn Brake Light Kit for Early VTX (set)
Item: 4601
Fits: All '02-'03 VTX1800, '04 VTX1800C, all '03-'05 VTX1300, '02-'03 Shadow Ace 750
*****
Triple Whammy Run-Turn Brake Light Kit for Late Yamaha (set)
Fits: All '04-'09 Road Star 1700 (ex. Warrior), all '04-'09 V-Star 1100 & 650, all '07-'09 V-Star 1300, '09 V-Star 950
Item: 4602
*****
Triple Whammy Run-Turn Brake Light Kit for Early Yamaha (set)
Fits: All Road Star 1600, All '98-'03 V-Star 1100 & 650
Item: 4603
*****
Triple Whammy Run-Turn Brake Light Kit for Mid to Late VTX (set)
Item: 4604
Fits: All '06-'09 VTX1300 R, S,T, C, '04-'05 VTX1800 R & S, '05 VTX 1800 C
'03-'08 Vulcan 1600 (except Mean Streak)
*****
Triple Whammy Run-Turn Brake Light Kit for Late VTX 1800 (set)
Item: 4605
Fits: '06-'08 VTX 1800 R, S,
T & C
|
